Know-HowInnovation and technology.

Forward-looking ideas, concept development and strategic thinking are basic elements of what we do. An active exchange takes place with universities, colleges and research institutes. We also value working with trade associations

ReworkTechnologies for precise work.

AVP stands for Advanced Vision Placement and achieves software supported, application independent placement of components.  This means:



  • No adjustment of the camera lens,

  • No alignment of respective camera images

  • Users merely mark the corners of the component with the ...
Read more

Typical faults in electronic assemblies are micro cracks inside interconnects of BGA solder joints. They lead to malfunction of the assembly even so that the BGA chip is full in function. 


De-soldering and cleaning of residual solder from PCB and BGA, re-balling of the chip and ...

Read more

Because of the very small amounts of solder on the contacts of QFNs the use of residual solder in rework is not recommended.  It is imperative that the pads of the board are cleaned; normally there is no possibility of applying new solder to them.  One way of providing solder to the ...

Read more

Manual adjustment and placement of components, exactly aligned with the pad arrangement of the board, happens simply and reliably with the SHP Positioning Arm.   STARTOOLS are used to pre align the placement position.   


The SHP Positioning Arm can be moved with great ...

Read more

DispenseTechnologies for precise work.

ATP stands for Advanced Time Pressure and provides high accuracy, maintenance free and user-friendly dispensing processes.  Special software algorithms, processing information from sensors and other hardware, produce extraordinary results and process stability across the ...

Read more

MARTIN dispense systems use stored look-up tables to compensate for viscosity variations caused by temperature changes. This results in constant dispense volumes under production environments. However, despite of available compensation a precise and driect closed-loop ...

Read more

A constant distance between board and dispensing tip is a basic requirement for reproducible dispensing results.  Should the use of a fixed distance pin not be practical while dispensing solder paste, the option Height Sensing will provide the required information needed for ...

Read more

All DOTLINER machines are supplied with a CCD camera.  The camera allows, amongst other features, the confirmation of the actual PCB position, compared with the alignment fiducials in the dispensing program.the fix-focus camera provides therefore a field of view in the size of ...

Read more

To avoid uncontrolled dripping of material from the dispensing tip the option Snuff Back is available.  This is especially important when dealing with low viscosities (ie thin liquids).  The amount of material in the syringe significantly affects this aspect. Too much vacuum can lead ...

Read more

SoftwareSoftware as a carrier of innovation.

The CLEVER DISPENSE Pro software enables you to work with the dispenser with ease. Dispensing recipes can be created, tested and saved conveniently at the workstation. Created recipes can be uploaded to the dispenser and are readily available to the user. All recipes can be ...

Read more

The software EASYSOLDER 07 guides the user through the entire rework process with clarity. The “AutoProfiler” is a special simplification. Using a few datapoints and the measured values of several temperature sensors, the software module creates a soldering and desoldering ...

Read more

VideosProduct and application videos.

EXPERT 05.6 IXH Rework Station

With the EXPERT 05.6 IXH rework station, which contains an integrated camera positioning system, MARTIN offers a cost-effective solution for the complete rework process. With the integrated camera even the smallest components can be manually placed and repaired ...

Board cleaning SMART DESOLDER & HOTBEAM 04

The SMART DESOLDER combines a manual hot gas source with a vacuum pen for extraction of residual solder. Damage to the pads from overheating or mechanical stress is avoided through targeted heating of the residual solder after lifting the component. The ...

Multichip Desolder EXPERT 10.6

The EXPERT 10.6 HV and HXV are perfect solutions for desoldering multiple components in one step. With this opportunity a tremendous amount of time can be saved. With less heating cycles the lifetime of the PCB is additionally increased. Martin offers various kind ...

Please turn
your device